Excellon EX-110 Specifications
*It still works!!!*

Machine Base:  Fine grain black granite

Number of spindles:  1

Drill / Rout Area:  20″ x 24″

Table Guides, Bearings & Positioning System:
Patented friction-less pre-loaded air bearing X, Y guides;
air bearing table flotation, Z-axis air bearing sleeve

Drill Hole Accuracy:  +/- .001″ typical

Routed Panel Accuracy:   +/- .002″ typical

Straightness of Travel:   .0001″ /ft

Spindle Run out T.I.R.:    .0005″ T.I.R. measured .75″ from collet

Spindle Mount Assembly:    Drilling mode: precision, friction-free,
self-aligning air bearing sleeve.

Routing mode:  air bearing sleeve with rigid dual pneumatic clamping

Leadscrews:  X,Y and Z re-circulating pre-loaded ball screws

Spindle Motor:   15,000 – 60,000 drill rout spindle

Drill Sizes:   .008″ – .250″ diameters with 1/8″ shank

Router Size:   Any common 1/8″ shank router bit

Tool Change System:  Tool Pod System: Automatic with 10 tool pods

Tool Management System: 120 tool cassettes

Control System:  Excellon’s CNC-6 advanced Microprocessor CPU
with 512K bytes of dynamic RAM
capable of storing 65,000 X, Y coordinates

Software:  Excellon’s Modular Software

Data Output:   Floppy disk, display screen

Options: paper tape punch, Distributed Numeric Control (DNC)

Data Input Floppy disk, keyboard

Options: paper tape reader, Distributed Numeric Control (DNC) optical scope

Dimensions & weight Machine; 32″ x 52″ x 56″ 2,000 lbs

Controller: 250 lbs.

Power Input:   230V, 50/60 hz, 20amp single phase

Air Input:   95-150psi, 20 scfm flow