Vin:  2011
LOW R&D USAGE!

A.	Belt Width:	9.5	241
B.	Heated Length:	70	1778
C.	Cooling Length:	96	2438
D.	Product Clearance Above Belt:	1.0	25
E.	Dimensions: Entry Table: Exit Table: Overall Length: Height: Width: Conveyor Height: Leveling Range:	18 18 220(18.3ft) 55 43 36 ± 1	457 457 5588 1397 1092 914 25
F.	Belt Speed Range Minimum Maximum	12/min 200/min	305/min 5080/min
G.	Number of Heated Zones	5
H.	Atmosphere:	Air
I.	Input Power:	220 VAC or 380 VAC available 3 Phase, 50 Hz 63.3 KVA Max 18 KVA Nominal
J.	Approximate Weight	3,000 lbs	1,400 kgs

 Heated Section

Nominal Operating Temperature:
Ambient to 950 degrees centigrade in the firing section.

Heating Method:
Type T-3 tubular quartz tube I-R lamps
located above and below the conveyor belt.
High temperature glazing is applied to all interior chamber surfaces
to ensure a clean, stable processing environment.Insulation: Multi-Layered, thermally optimized, graded, insulation provides efficient thermal stability, cool external
panel surfaces and minimal heat loss.  Low mass refractory
materials are utilized throughout the heated chamber resulting
in rapid heat-up and cool-down times.

System Layout

A.			Inch	MM
Entrance, including burnout atmosphere inlet, air curtain, and baffle door assembly			18	457
B.	Length (in)	KVA	Lamps (Quantity)	Spacing (in/mm)
Zone 1	10	12.5	10	2/51
Zone 2	20	2.6	12	3.3/84
Zone 3	20	2.6	12	84
Zone 4	10	12.5	10	2/51
Zone 5	10	17.5	14	1.3/33
			Inch	MM
C.	Insulated Exit		6	152
D.	Water Cooled Section with air inlet, cooling quench and exit air curtain		36	914
E.	Free Cooling		12	305
F.	Fan Cooling Section with air filter on fan inlet		42	1067

---

 

---

---

---